So, this is a bit of a philosophical post. Looking around my trashed shop I see a number of tools. Some get quite a bit of use, some barely touched for a couple of years. OK... I know.... most of them have been barely touched for years but let's just say some more than others. Still, my mind wanders off to thinking about future tool purchases. I would love a lathe. Nothing fancy, just a decent midi lathe to do some turnings. A Scroll saw would be nice too. A couple more routers would be handy. But the most glaring tool need is a new table saw. I've been using a Ryobi BT3100 for years now and it's demise is eminent. It really has been a decent saw packed with forward-looking features when it was still being made. It had a true riving knife when even the nicest saws didn't come with one. It has a sliding miter table and accessory table that could easily be repositioned on the rails for various configurations. It has been quite versatile, but at it's heart it's still a 15 amp, direct drive, job site saw that bogs down easily with thick hardwoods and can have 1/16 inch of runnout.
Looking through the catalogs, I'm noticing decent table saws aren't cheap. It looks like Grizzly has all but abandoned their reasonably priced contractor saw models at this time. Jet still has one old model that shows up here and there, and the Ridgid contractor saw models seem to only show up on the HD site occasionally. The Hitachi and Porter Cable saws look nice, but it seems like they are just another direct drive model underneath. Dare I say, Craftsman has a new one out that looks promising but you never know with them. So, I find myself asking a strange question - do I really need a table saw? Can I get away with what I have?
Now, now - I know I NEED a table saw, so don't go getting your panties in a bunch just yet. BUT - do I really need a hybrid or cabinet saw? Of all the tools, the table saw takes up the most room. In my little shop, the idea of being able to use a Bosch jobsite saw that unfolds and folds up easily to be stored out of the way is actually... appealing. I'm finding myself getting more comfortable with the idea of supplementing with the router, bandsaw, and hand tools. And I'm finding this concept a little liberating.
If you used to watch David Marks "Woodworks" show, you might have caught his masters episode where he visited James Krenov and Art Carpenter. One thing that was very interesting was that their shops - especially Krenov's - were relatively sparse when it came to a variety of tools. Krenov has reduced himself to a bench top band saw, bench top jointer, and a few well thought out hand tools. Yet, he was still doing some beautiful work. And it makes me think that sometimes I miss the point. I can get so wrapped up in the collection of tools I forget there is more than one way to do the work at hand. When forced to the confines of a small basement shop and tool budget limitations, my mind starts thinking going minimal is... good.
All this thinking gives me a headache, but it also makes me wonder if anyone else goes through this. Maybe I should pose the question in the TWW forum? Hmmm.. it might ruffle a few feathers, that's for sure :)
Tuesday, September 14, 2010
I know, I know - where the hell have I been? Sorry guys, but sometimes life takes us in many different directions at once and it's hard to keep up with the refinements. I do have some excuses that you're welcome to take your pick from:
- The backyard stone patio project took way too long - still going, in fact.
- Obligations to my family have delayed progress.
- Work has been engulfing, finally concluding with a promotion last week.
- The new puppy still sucks all of the life and free time out of us.
- The fishing was just alright, but I was fulfilling an obligation to help my best friend de-stress.
- I was forced to take up golf by my nephews and future son in law.
- the shop redesigned and refined
- bench plane tune up redux - this time, less time, more content
- fun with block planes - fine points of tuning
- sharpening for the realistic, and financially frugal
- a comparison of bench plane vs. power tool stock milling
- back bevels - why you NEED 4 or more smoothing planes
- shooting board designs
- the workbench
- Why even Charger needs at least a couple working planes
- a strangely designed piece of living room furniture
- my favorite books, favorite tools, and favorite artists features